Create this code and use it to control the robot

Go to Ozoblockly.com and create this code

code

Set the code to Level 3

 

level 3

All of the code except the move 5 mm 15 mm/s movement block comes from Level 4.

  1. Calibrate the robot to the screen (hold button 2 seconds and put on a white area of the screen until it blinks green and turns off)
  2. Load the program (turn the robot on and press LOAD)
  3. Calibrate the robot to the paper (hold button 2 seconds and put on a black space on the paper until it blinks, moves,and turns green)
  4. Double click to run the program.