Do you have all of the points for the Jack Lift and Arbor Press?

Go through these in order and check off as you are finished.
Name: _______________________________________

  1. Jack Lift 3 parts assembled. Here is help ( 3 points)
  2. Create an exploded view and balloon drawings and parts list for the Jack Lift. Here are directions
    1. Save the exploded presentation as JackLiftPresentationYourName ( 2 points)
    2. Save your drawing as JackLiftDrawingYourName (2 points)
    3. Save your word document as JackLift_YourName that has: ( 6 points)
      • wire frame drawing
      • explains why there is an overlap (Follow directions on the Compsci drive Activity 2-3-5)
      • screen shot of your jack lift balloon drawing with parts list
      • everything saved with the RIGHT names!
  3. Arbor press base together (Here is a video to get you started with the column and base) ( 3 points)
  4. Arbor press ram front section assembled ( video on how to add the moving up/down part ) ( 3 points)

Challenges: ( 1 point each )

  1. Challenge: make a exploded pictorial drawing and ballooned partslist drawing of your Arbor Press. Save as ArborPressDrawingYourName.
  2. Assemble the model train, parts are on the compsci drive
  3. Make the cylinder drive the bar in the Driven Assembly. parts are on the compsci drive (Do this BEFORE you do the insides of the Arbor press)
  4. Assemble the internal workings of the Arbor press. here are hints on how to get the peg and gear connected