Creating the Insert Assembly

1. Copy the Insert Assembly folder to your drive from the Third Quarter folder
2. Set Inventor to see the Insert Assembly as your new, current project
3. Create a new assembly
4. Place the piece of wood in the assembly
5. Place 1 nut, bolt and washer in the assembly
6. Place 1 screw in the assembly
7. Constrain the screw to fit in one of the side holes.
8. Pattern the screw to fill all 4 holes
9. Constrain the bolt then turn to the opposite side and constrain the washer and nut
10. Pattern the bolt, washer and nut to fill all 6 holes.

Save as InsertAssemblyYourName in your Insert Assembly folder

Use the video directions if you would like help.